WaveTopSign 4kw Water Cooled Spindle Motor Kits GDK110-24Z For CNC Metal Cutting
Main Application:
Metal engraving and milling, low speed and high torque. can engrave on gold,silver,copper, aluminium,steel,Pb etc soft metal surface working.
1. 4KW 380V (8A) / 220v (14A) ER20 ER25 WaterCooled Spindle 4bearings
2. 4kw 220V or 380V VFD Inverter
3. Quantity: 8Pcs (ER25)
4. 4Pcs Plate
Features:
1. 4KW 380V (8A) / 220v (14A) ER25 300Hz Water Cooled Spindle 4bearings
2. P4 angular contact bearings ,2×7002C P4 DT & 2×7002C P4 DT,increase spindle life. (New type,4 bearings)
3. Longer length make the torque bigger,more powerful.
4. Carefull assembly make the spindle more precisional.
5. Precision 0.01mm.Coaxial degree less than 0.0025mm
6. We have certificates and high-quality products can stand the test! ! !
1. Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.
2. Cooling: Water cooling 4. Power Interface: Optional H17-4 pins waterproof air plug. The air plug marked "1", "2", "3", "4", "1", "2", "3" were connected to inverter (U, V, W),
3. Connected inverter ground. (Pay attention! Our spindle "4" connecting to GND, promised personal safety !!)
4. Power: 4kw
5. Voltage: 220V 14A 380V 8A
6. Frequency: 0-300Hz
7. Speed: 0-18000rpm
8. Runout Off: 0.01mm
9. 4pcs angular contact ball bearings
10. Bearing Type: 2 × 7002C P4 DT & 2 × 7000C P4 DT
11. Water Cooling ER25 collet chuck
12. Grease Lubrication
Power: 4kw
Input Voltage（Phase）: 220v（1 Phase）/380v（3 Phase）
Output Voltage（Phase）: 220v（3 Phase）/380v（3 Phase）
Input Frequency: 50/60Hz
Output Frequency: 400Hz
Control Method: V/F control; Open-loop flux vector control
Features:
1. Control Mode is SPWM,it is very easy to use and convenient
2. Protection functions are very strong,
3. Fin over-heat protection,
4. Overload protection,
5. Fuse protection,
6. Restart after instant stop,stall protection.
7. Powful function
Features：
Type: ER25 High accuracy collet
Material: Steel
Quantity: 8cs(ER25)
Precision: ≤ 0.008mm
Hardened & Precision ground
Widely used in boring, milling, drilling, CNC milling machine wire tapping,engraving spindle machines,machining centers and other processing.
Features:
1. Adopt full sandblasting appearance treatment
2. Slot design, easy to lock the spindle
3. The cast aluminum has higher precision and is more durable
4. Scientific casting, stronger earthquake resistance
Product Parameters:
Diameter: 110mm
Material: Cast Aluminium
1. Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
2. Inner wall is very smooth, outer walls is sandblasted, relatively fine uniform, but not very smooth.
3. Cast aluminium fixture is much heavier than aluminium profile fixture. Cast aluminium fixture is mainly used for fixation of ancillary products, thereby ensuring the verticality of balancing and ancillary products, ancillary products to improve running accuracy, reduce noise, reduce the accumulated error.
We typically ship in 1-3 business days (Mon-Fri). And you will receive your order in 10-15 business days (Mon-Fri). Please know that we are doing the best we can to get orders out promptly.
We send FEDEX by default.
If you need to change other logistics, you can contact customer service.
When your order ships you will receive a separate email providing you with a tracking number to track your order. Sometimes this email gets sorted into spam or promotions folders so be sure to take a look in there if it feels like you have been waiting a little too long.
You can also log into your account and click on the order in question to see the status.
*Please note that sometimes the tracking can take a day or two to be updated by the carrier. If it looks like its not moving, chances are its on its way!
OUR PRODUCTS
Attention! Deal Zone
Featured Products
About us
Contact us
Your Suggestion
Corporate Philosophy
Privacy policy
Terms of Use
Customer Care
My Account
Track your Order
Customer Service
Returns/Exchange
Product Support
© 2022 Pext - All Rights Reserved.
