Leadshine 2Phase Stepper Motor Driver DM542S Supply Voltage 20-50VDC

WaveTopSign Leadshine 2Phase Stepper Motor Driver DM542S

100 left in stock

34.00

DAYS

HRS

MINS

SECS

Variant

Default

PAYMENT ACCEPTED

High quality

In stock

Fast delivery

Details

Features:
* 32-bit DSP Technology
*Ultra Low Vibration Noise
*Precision current control greatly reduces motor heating
*The current is automatically halved at rest, SW4 selection
*Support single and double pulse, dial code selection
*Can drive 4,6,8 line two-phase stepper motor
*Optically isolated differential signal input
*The impulse response frequency can be up to 200KHz

DM542SAdvantage :

* A new set of eight-digit dial switches can be added to set multiple functions suchas filtering, alarm resistance, single and double pulses.

* Subdivision range: 200~25600，More extensive than the DM542.

P1 Function	DM542S Details
PUL	Pulse signal: Pulse active at rising edge; 4-5V when PUL-HIGH, 0-0.5V when PUL-LOW. Minimal pulse width of 2.5μs. Add a resistor for current-limiting at +12V or +24V input logic voltage (1K for +12V, 2k for +24V). The same as DIR and ENA signals.
DIR	DIR signal:This signal has low/high voltage levels to represent two directions of motor rotation.. Minimal direction setup time of 5μs. Also swapping the connection of two wires of a coil (e.g. A+ and A-) to the drive will reverse motor direction.
ENA	Enable signal: This signal is used for enabling/disabling the drive. High level +5V (NPN control signal) for enabling the drive and low level for disabling the drive. PNP and Differential control signals are on the contrary, namely Low level for enabling. By default it is left UNCONNECTED (ENABLED).

Shipping

We typically ship in 1-3 business days (Mon-Fri). And you will receive your order in 10-15 business days (Mon-Fri). Please know that we are doing the best we can to get orders out promptly.

We send FEDEX by default.

If you need to change other logistics, you can contact customer service.

Return

We want you to be thrilled with your purchase and come back for more. If you're unhappy for any reason, please contact us at wavetop-abbey@foxmail.com to initiate a return or exchange within 14 days of delivery.

Order

When your order ships you will receive a separate email providing you with a tracking number to track your order. Sometimes this email gets sorted into spam or promotions folders so be sure to take a look in there if it feels like you have been waiting a little too long.

You can also log into your account and click on the order in question to see the status.

*Please note that sometimes the tracking can take a day or two to be updated by the carrier. If it looks like its not moving, chances are its on its way!