WaveTopSign CR120 CR150 CO2 Laser Source
1. Open the packing box and check for obvious transportation damage;
2. Connect the cooling water system and connect the water flow switch to ensure that the water flow is not less than 6 liters/min; check the water
Road to ensure no water leakage;
3. Use the shortest copper cable not less than 8mm2 to connect the laser and 48VDC power supply;
4. Connect the control signal to the laser through DB25;
5. Place a light barrier or power meter in front of the laser to safely block the laser light path;
6. Turn on the PWM signal and the laser will output laser light.
Power Selection and Connection:
The DC switching power supply selected by the customer must meet the requirements of the CR120/150 laser, with a voltage of 48V and a current of not less than 62A. The wiring between the power supply and the laser must not be reversed, otherwise the laser RF power supply will be damaged.
Control Signal Connection:
1. The external control signal of CR120/150 laser is connected through the DB25 connector on the rear panel of the laser.
PIN3 and PIN15 are short-circuited and can be used as a switch. PIN7 is connected to PWM signal, and PIN20 is connected to PWM signal ground.
2. The duty ratio of CR120/150 laser input signal cannot exceed 60%, adjust the PWM signal duty
Ratio can control the laser output power. The signal duty cycle exceeding 60% will damage the laser.
We typically ship in 1-3 business days (Mon-Fri). And you will receive your order in 10-15 business days (Mon-Fri). Please know that we are doing the best we can to get orders out promptly.
We send FEDEX by default.
If you need to change other logistics, you can contact customer service.
When your order ships you will receive a separate email providing you with a tracking number to track your order. Sometimes this email gets sorted into spam or promotions folders so be sure to take a look in there if it feels like you have been waiting a little too long.
You can also log into your account and click on the order in question to see the status.
*Please note that sometimes the tracking can take a day or two to be updated by the carrier. If it looks like its not moving, chances are its on its way!
OUR PRODUCTS
Attention! Deal Zone
Featured Products
About us
Contact us
Your Suggestion
Corporate Philosophy
Privacy policy
Terms of Use
Customer Care
My Account
Track your Order
Customer Service
Returns/Exchange
Product Support
© 2022 Pext - All Rights Reserved.
