WaveTopSign Leadshine 3DM583 3Phase Stepper Motor Driver
1) Cost-effective, ultra-low noise
2) Up to 8 subdivisions available
3) Power supply voltage up to 50VDC
4) Output current peak value up to 8.3A (average 5.9A)
5) The input signal is TTL compatible, and the current is automatically halved at rest.
6) Can drive 3, 6 line three-phase stepper motor
7) Optically isolated differential signal input
8) Impulse response frequency up to 400KHz (higher optional)
P1 Function |
3DM580S Details |
PUL(+5V / PUL) |
Pulse signal: Pulse active at rising edge; 4-5V when PUL-HIGH, 0-0.5V when PUL-LOW. Minimal pulse width of 2.5μs. Add a resistor for current-limiting at +12V or +24V input logic voltage (1K for +12V, 2k for +24V). The same as DIR and ENA signals. |
DIR (+5V / DIR) |
DIR signal:This signal has low/high voltage levels to represent two directions of motor rotation.. Minimal direction setup time of 5μs. Also swapping the connection of two wires of a coil (e.g. A+ and A-) to the drive will reverse motor direction. |
ENA (+5V / ENA) |
Enable signal: This signal is used for enabling/disabling the drive. High level +5V (NPN control signal) for enabling the drive and low level for disabling the drive. PNP and Differential control signals are on the contrary, namely Low level for enabling. By default it is left UNCONNECTED (ENABLED). |
We typically ship in 1-3 business days (Mon-Fri). And you will receive your order in 10-15 business days (Mon-Fri). Please know that we are doing the best we can to get orders out promptly.
We send FEDEX by default.
If you need to change other logistics, you can contact customer service.
When your order ships you will receive a separate email providing you with a tracking number to track your order. Sometimes this email gets sorted into spam or promotions folders so be sure to take a look in there if it feels like you have been waiting a little too long.
You can also log into your account and click on the order in question to see the status.
*Please note that sometimes the tracking can take a day or two to be updated by the carrier. If it looks like its not moving, chances are its on its way!
OUR PRODUCTS
Attention! Deal Zone
Featured Products
About us
Contact us
Your Suggestion
Corporate Philosophy
Privacy policy
Terms of Use
Customer Care
My Account
Track your Order
Customer Service
Returns/Exchange
Product Support
© 2022 Pext - All Rights Reserved.